TB-60 | 乾燥機の大紀産業株式会社

Processing volume: When drying on 30 resin trays, it is possible to process 360-420kg shiitake mushrooms and 6,000 pieces with persimmons.

Circulating indirect hot air drying: Clean hot air heated near the special furnace is sent to the drying room for drying. The standard heat source is an oil burner, and other gas / steam boilers / electric types are also available.

Safety: The main body uses bimetal to prevent overheating and shuts off the burner solenoid valve when it reaches 130℃ near the main body. Burner burns safely with flame detection CDS and protection relay control. The control version has double temperature control. Safety is ensured by double monitoring.

Outdoor exhaust: Improves drying efficiency by discharging moist air during drying to the outside.

Foreign matter countermeasures: Everything to dry food is shrimp shelf angle, door cover etc.

Outdoor exhaust: By keeping the moisture exhausted from the dryer room outdoors, the room where the dryer is installed is kept clean and dry.

3-stage airflow adjastment: By switching the amount of warm air, the quality can be finished in a short time. There is also a fuel saving effect.

Urethane insulation panel: The sandwich panel of double-sided color steel sheet sandwiched with urethane insulation material provides excellent heat insulation and durability. Polyurethane foam has a collection of small bubbles. Each of these small hard bubbles is an independent bubble, and the inside of urethane has a structure that prevents heat from conducting.

Oil burner: High-performance and safe burner with control relay, CDS (flame detection sensor), ignition transformer, electromagnetic pump, and blower motor. Pressure is applied by an electromagnetic pump, and vaporized fuel is ignited through a nozzle. At this time, appropriate air is sent forward by the blower motor. There are two types of burners: kerosene, diesel and a heavy oil specifications.

Resin tray: A container for placing dried products. The bottom is mesh. Size 600× 1200×30mm, made of resin (PP). In addition, it has a mesh structure that minimizes the contact area between resin and dry matter. The heat-resistant temperature is 70℃.

Digital standard: The thermistor sensor's built-in digital temperature control turns the burner on and off faithfully to the set temperature. The temperature and drying time are displayed separately on the digital display. In addition, a high-function control panel with added safety device function (double sensor) is installed.
*The air volume switching function is only available on 60F and 30F.

Automatic damper: Intake and discharge (moist air) to the dryer body is automatically controlled. Control from fully open to fully closed automatically according to time.

PRO
LCD: The graph can be displayed and the temperature, time, air volume, and damper can be freely programmed.

Show functions

Show options

PRO: LCD Program 30 pattern
Start timer
Graph display function
Temperature, time, air volume, damper can be set freely
interval timer function

Model name	TB-60-F	TB-60-PRO
Dimensions （W×D×H）(mm)	3437×1488×2346
Tray	60 rasin trays
Tray size (mm)	600×1200　depth 30
Power supply	Single-phase 100V　outlet capacity 15A
Power consumption 50/60Hz	1005/1118W	1075/1188W
Nozzle (G: Gallon)	2.0
Heat source	Kerosene, diesel or heavy oil *Gas, steam and electricity are available as options
Blower	Voltage ventilation fan 50cm 750W
Control pannel ＜Display＞	Digital	LCD
Control pannel ＜Temperature controller＞	Thermistor
Control pannel ＜Timer＞	End timer	Reservation timer・Interval timer・End timer
Control pannel ＜Airflow adjustment＞	Strong / Medium / Weak
Operation box ＜Auxiliary temperature control＞	－	〇
Operation box ＜Auxiliary temperature control＞	○
Intake and exhaust	Manual	AUTO
Drying chamber material	Urethane insulation panel
Chimney diameter (mm)	150φ
Oil tank	90ℓ
Drying method	Circulating box type
Drying capacity (kg)	240 - 420